Song profile for Mind of a dreamer
ericade.radio knows the chiptune and demoscene! We're the radio station playing all the best tunes from the most prominent, promising or trending artists in the scene. We also know about the artists and songs as well.
This profile was last updated on: 2026-10-06 12:45:57
🎙 Curated by DJ Daemon
View all songs
Track Details
- MD5
1d68cfffdac5c911ab94fa36e9073cb4- SHA-1
6192ec189f22d808d82525514cf5c9ee079897b6- SHA-256
31fc4f2cccca3ece92bf7f31582db6b8f975d2f153321550f9600b101dac70fa- SHA-384
eabc2a21fc5e8237d4a17ac3bca00f10277d79cf611cbab07d9d13d68f695205accc5bf13e2c065374b3ef8fe4493099
Play History
- 🕘 2026-10-06 10:45:57
- 🕘 2026-09-27 11:55:09
- 🕘 2026-09-21 13:54:47
About the artist BeaT View all tracks ›
An artist from the United States of America, whose real name is Seth Peelle.
🎧 1,108 plays on ericade.radio
Additional data from ModArchive
Sample & instrument names
=-MIND OF A DREAMER-=
by BeaT (Seth Peelle)
of Osmosys/Full Circle
1st place winner in
MC6 Rookie Division
Est. Length -- 5:05
Completed on:
July 14, 1998
Final release:
October 4, 1998
Except for a few minor
volume and tuning ad-
justments, this ver-
sion is identical to
the original MC6
entry.
All samples are
original. They were
all taken from the
Korg 03R/W, except for
the resonant samples
which were created in
SubSynth.
beat_drigon.com
http://www.drigon.com
/~beat _
| . \|
-*- . /_/
. | |\_
Seth Peelle 1998
. .
. .
---==*
. .
...Dare to dream!
Data from modarchive.org, last checked 2026-09-30 22:03:22.
Mp3 file details
Open the waveform at full size (opens in a new tab)
- Scan status Whether the station’s analyser could read this mp3. “OK” means every number in this box was measured from the actual audio, not copied from a tag that somebody typed.
- OK
- measured from the file itself
- Scanned When the file was last analysed. If the mp3 is replaced afterwards, these numbers describe the old version until it is scanned again.
- File size How much room the mp3 takes on a disk, and how much data you use when you play or download it. It is roughly the bit rate multiplied by the length.
- 7.2 MB
- 7 560 142 bytes
- File last changed When the mp3 on our server was last written - usually the day it was uploaded, or encoded again.
- Length How long the recording plays. It is measured from the audio itself, so it is right even when a tag in the file says something else.
- 5:15
- minutes : seconds
- Tempo How fast the tune goes, in beats per minute - the speed you would tap your foot at. This was measured automatically by the station's analyser (ffmpeg and bpm-tools' "bpm"), not typed in by a person, so it is not guaranteed to be 100% accurate: tunes without a steady beat can throw it, and where it is wrong it is usually exactly half or double the tempo you would count.
- 160 BPM
- a fast tempo
- Bit rate How much data is spent on each second of sound. More data keeps more detail when the audio is squeezed into an mp3: 128 kbit/s is acceptable, 192 is good, and 320 is the most an mp3 can hold.
- 192 kbit/s
- good quality
- Sample rate Digital audio is a long row of measurements of the sound wave. This is how many are taken every second. 44.1 kHz is the CD standard and 48 kHz the video and broadcast standard - both capture everything a human ear can hear.
- 44.1 kHz
- 44 100 measurements a second
- Channels How many separate signals the file holds. Mono is one. Stereo is two - left and right - which is what lets a sound be placed somewhere between your speakers.
- Stereo
- 2 channels
- Codec The method used to shrink the audio. MP3 leaves out the detail an ear is least likely to miss, which makes the file about a tenth of the size of the original recording.
- MP3
- Loudness The average loudness of the whole recording, the way a listener hears it (“integrated loudness”, in LUFS). The closer to 0, the louder. Music services aim for about -14 and podcasts for about -16, so that you do not have to reach for the volume between tracks.
- −13.7 LUFS
- typical for streaming and podcasts
- Loudness range The distance between the quiet passages and the loud ones, in LU (1 LU is 1 dB). A small number means an even, compressed sound - good in a car or on a phone. A large number means big swings between soft and loud.
- 6.6 LU
- moderate
- True peak The highest level the signal ever reaches, including the peaks that appear between the measurements when the file is turned back into sound. 0 is the ceiling: above about -1 dBTP, a recording can crackle (“clip”) on some players.
- −1.9 dBTP
- safely below the ceiling
- Dynamic range How far the loudest peaks stand above the loud parts of the recording, in dB - the “DR” number that music collectors compare albums by. A low number (under 8) means the sound has been squeezed until everything is equally loud: punchy, but tiring to listen to. 14 and up means the music has room to breathe, with real hits and real quiet. It says nothing about how loud the file is: turning the volume down does not change it. Chip music made of steady square waves naturally lands low.
- DR 9
- 9.4 dB · moderately dynamic
- Left channel level The average strength of the left channel over the whole recording (“RMS”), counted in dB below the loudest level a digital file can hold (dBFS). More negative means quieter. Compare it with the right channel.
- −16.5 dBFS
- average (RMS) over the whole file
- Right channel level The average strength of the right channel over the whole recording (“RMS”), counted in dB below the loudest level a digital file can hold (dBFS). More negative means quieter. Compare it with the left channel.
- −16.3 dBFS
- average (RMS) over the whole file
- Channel balance The left level minus the right level. Close to 0 dB means both sides are equally loud. More than about 1 dB and the whole mix leans towards one ear.
- 0.21 dB
- balanced
- Stereo width How strong the part that DIFFERS between left and right is, compared with the part they share. A very low number (-40 dB or less) means both sides carry the same sound - mono in practice. A higher number means a wider stereo picture; a very high one can sound thin on a single speaker.
- −19.4 dB
- ordinary stereo
- Cover art in the file Whether a picture is stored inside the mp3 itself. A player shows it as the album art when the file is played somewhere else - in a car, on a phone, offline.
- No
ID3 tags Text stored inside the mp3 file itself - title, artist, album and so on. It is what a music player, a phone or a car stereo shows while it plays the file, and it travels with the file wherever it is copied.
Measured from the mp3 file on our server by the station’s own analyser. Point at a label, or select its question mark, for what the number means.
📻 Station details
The home of retro computing and retro gaming music. Streaming 24/7 with shows and podcasts about retro computing, retro gaming, demo scene and all things nerdy in the retro world.
Comments